Providing value - courteous service, quality products and fast turn around on orders - all at competitive pricing.

Auto Roll Core Guide

(For Identification Purposes Only)

AE AE_Core.jpg (5518 bytes)

Designed to fit American Air Filter "Roll-O-Matic." Core is 3/4" metal pipe with 11" metal end plates.

CBCB_Core.jpg (6010 bytes)

Designed to fit Cambridge "Auto Roll."  Core is 3/4" metal pipe.


CC_Core.jpg (5833 bytes)

Designed to fit Continental "Conomanual" or "Conomatic."  Core is 3" ID fiberboard tube with a pin 2-1/2" from one end.

LC_Core.jpg (5833 bytes)

Designed to fit Commercial "FulFlo" and Mine Safety Appliance equipment.  Core is 3" ID fiberboard tube with a pin 2-1/2" from one end.

FF_Core.jpg (5227 bytes)

Designed to Farr "Roll Kleen."  Core is 2-1/8" ID fiberboard tube.  No drive pins, discs or cups.

AMAM_Core.jpg (5595 bytes)

Designed to fit Airmaze "Roll-A-Maze."  Core is 1-7/8" ID fiberboard tube with recessed metal cup 5/8" from each end.  There is a 1-1/2" X 3/4" rectangular slot in both cups.


TAM_Core.jpg (5595 bytes)

Designed to fit Trane Company "Roll Filter."  Core is 2-7/16" ID fiberboard tube with recessed metal cup 1-1/2" from end.  There is a 1-1/2" X 1-1/2" square in both cups.

CRAM_Core.jpg (5595 bytes)

Designed to fit Carrier series "31NA" and "31NC."  Core is 2-7/16" ID fiberboard tube with recessed metal cup 1-1/2" from end. There is a 1-1/2" X 1-1/2" square in both cups.

BLCBLC_Core.jpg (6122 bytes)

Designed to fit BLC Industries equipment.  Core is a 1-1/2" metal pipe with 2 drive pins that are 1-3/8" from each end and 11" end plates.